CHECK TIRES REVISION, HERE ARE THE CHECKS TO BE CARRIED OUT ON THE TIRES
Check tire review, here are our tips
Another element not to be underestimated is the thickness of the tread. The legal tread depth limit should be 1.6mm for cars, 1mm for motorcycles and 0.5mm for mopeds. When the thickness is lower than these measurements, the vehicle being revised will be rejected. This will result in a repeat of the overhaul within a month, where the tires will have to be replaced. If you like to learn more check out also federal tires review here!
An aid for checking the tread depth comes from the TWI (Tread Wear Indicator), the small notch that can be seen on the bottom of the tread channels. considered dangerous by the manufacturer), the analysis of the tire leads to a result similar to that in the figure. In addition, the tire check that is normally performed on at least three points across the width of the tire and in three different positions, to check its regular wear.
Another important check that is carried out concerns the condition of the tire sidewalls, which must not show cuts, cracks, swellings, which affect their characteristics and could lead to bursting when one least expects it, with serious danger to the occupants and those close to the vehicle.